This boat has no rod storage, or I should say, no practical rod storage. Had a bud at a machine shop make a bar to go across the back of the leaning post. It's anodized AL and he said it would be a pain to weld. I took some measurements and he coped out the ends of a solid 1" stainless rod to fit the contour of the adjoining tubes and the drilled and tapped the ends for 1/4x20 Bolts. Got it installed today after work and fitted four clamp on rod holders. Now we're talking!
Outiggers came today. Have them together, just need to string them up and crimp on the rigging.