Varmint Hunters Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
55 Posts
Discussion Starter · #1 ·
Anyone know what the SAMMI specs are for the primer pockets are? Basically want the depth and the I.D. of the casing. Need them for the large rifle, large pistol, and the small & rifle/pistol. Thanks for the info. Bandit
 

·
Registered
Joined
·
258 Posts
You might try Jim Calhoun's web site, I believe he has a section on primers.
Large rifle and pistol are the same dia. but the pistol primer is shallower.
Small rifle and pistol primers are the same size. The cup thickness is less for pistol than rifle because of lower pressures and weaker hammer springs.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top