Varmint Hunters Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
I have the table top and pipe for the legs. Does anyone know of a source for welded leg brackets for threaded pipe legs?
 

·
Registered
Joined
·
3,007 Posts
Yep..Dog Buster...

Bob Hagara used to make & sell them I got the smaller size and have been well satisfied. Don't have his email right now, but he'll probably see your post.

Rick
 

·
Registered
Joined
·
3,317 Posts
I used pipe flanges on mine, worked great, if you ever have to move the bench you can just unscrew 'em if you want.
 

·
Registered
Joined
·
302 Posts
another idea...not screw in legs... locking collar

i used these tables with slide in legs that used a locking collar.......
also had a frame made out of 1 in sq tubing that gave a lot of rigidity

good tables for quick set up and being solid..... had a very rigid material for the top........ used 2 in alum for legs i think....... the combination of quick set up and solid shooting platform was great...... seemed more solid than my screw in leg table......... 2 in legs made a difference....


http://i18.tinypic.com/2djt7gw.jpg


http://i12.tinypic.com/2zqt1xv.jpg

If i can get a table made like this, it would be what I would want for a new table.......

(Man of Steel do you have your torch and welder working?????)

if you do go with screw in legs......

I made some brackets using pipe couplers..... cut at an angle of about 2 - 3 threads one side to the other....... then welded to a piece of flat steel..........
my table with screw in legs was not as solid as this one in the pic.... but worked pretty well.......

R
 
1 - 7 of 7 Posts
Top